PEL Large Mains Fencers/Energisers
Remote Controlled Energisers
Code and Product Description
PE835R
54 Stored Joules 36 Output joules (maximum) Fence up to 500 acres Power 210 miles - 336 km of wire High and Low Output Terminals Needs 10 x 5ft Earth Bars For professional use only
PE820R
34 Stored Joules 22 Output joules (maximum) Fence up to 275 acres Power 160 miles - 256 km of wire High and Low output terminals Needs 8 x 5ft Earth Bars For professional use only
PE 415i
20 Stored Joules 15 Output joules (maximum) Fence up to 150 acres Power 90 miles - 150 km of wire High and Low output terminals Needs 6 x 5ft Earth Bars EU A12 compliant
PEL 3 in 1 Control
Remote control/Fault finder/Volt meter Turns on and off fencer from any point on farm Faultfinder arrow points direction of fault Digital Voltmeter voltage reading on wire up to 9900 volts Rugged impact resistant case Needs 9v Square Battery
Erecting and Earthing your fencer
Connect PI36 2.5mm cable from fencer terminal to fence wire Connect PI36 2.5mm cable from earth terminal to first earth bar. Earth field must be moist and located 33ft from Any electrical or telephone earth stake. Any water pipes including disused water pipes Any buildings using structural steel or reinforcing steel in ground. N.B. Use 5ft long earth bars at least 12-15ft apart.
100 Ohms is the resistance caused by heavy vegetation growth on the fence wire